Our goal is to exceed our customers' expectation in providing quality products

Google+
LinkedIn
Pinterest

+86-177-4621-9784
admin@wsbearing.com

SKF Pillow block ball bearing unit SKF SYF 25 FM

Home SKF BEARING SKF Pillow block ball bearing unit SKF SYF 25 FM

SKF Pillow block ball bearing unit SKF SYF 25 FM

Ball bearing units with short base plummers (pillow table) consist of an insert bearing mounted in a cast iron housing that can be bolted to the support surface. This type of flush bearing is suitable for applications where the direction of rotation is fixed. With a narrow inner ring, it locks onto the shaft by an eccentric sleeve for easy installation.

  • sturdy
  • Narrow series
  • Easy to install
  • The bearings are pre-greased and sealed
  • Suitable for one-way rotation
  • Withstands initial static misalignment
SKF BEARING

Description

SKF SYF 25 FM

Meets standards
Not standardized
Specific Uses
For material handling applications
Housing material
cast iron
Bearing seals
Sealed on both sides
Bearing seal type
Standard contact type
Sealed unit
No
coating
No
Dimensions - SYF 25 FMDimensions - SYF 25 FM

size

d
25 mm
 aperture
d1
≈33.74 mm
 Inner ring flange diameter
d2
37.4 mm
 Locating ring outer diameter
A
36 mm
 Base width
A1
22 mm
 Maximum width
B1
31 mm
 Overall width of the bearing
B4
4.75 mm
 Distance from the side of the fastener to the center of the thread
H
36.5 mm
 Spherical bearing position center height
H2
70 mm
 Overall height
J
50.8 mm
 The distance between the connecting bolts
L
70 mm
 Overall length
s1
23.5 mm
 The distance from the side of the lockbuckle to the center of the raceway
THREADED HOLES
RG
1/4-28 UNF
 The grease nipple thread of the housing
R1
2 mm
 The axial position of the housing thread
Rα
45 °
 The angular position of the housing threads
GLIB
DN
6.5 mm
 The diameter of the top sphere of the grease nozzle
SWN
7 mm
 Hexagonal size of the grease nipple
GN
1/4-28 SAE-LT
 Grease nipple thread

Data calculations

Basic dynamic load rating C
14 kN
Basic static load rating C0
7.8 kN
Fatigue load limits Pu
0.335 kN
Limit speed
7 000 r/min
Ultimate speed at h6 shaft tolerances

Installation information

The thread that connects the bolts G
M10
Thread length G1
15 mm
Set screws G2
M6x0.75
Hex wrench size for set screws
3 mm
Recommended set screw tightening torque
4 N·m

As a professional bearing exporter and SKF distributor, WS Bearing stocks thousands kindsof ball bearing unit for sale，We can export to Singapore–Viet Nam–Malaysia–Indonesia-Germany-USA etc.we have always been committed to providing our customers with the highest quality products and the most satisfactory services. Through collaborations with top brands such as  SKF, TIMKEN, FAG, THK,and others, we have not only established a wide range of product lines but also accumulated rich industry experience and technical knowledge. If you have problems about selecting proper bearings for your special applications, please contact us right now

Inquiry Us





Related Products