Our goal is to exceed our customers' expectation in providing quality products

Google+
LinkedIn
Pinterest

+86-177-4621-9784
admin@wsbearing.com

SKF Pillow block ball bearing unit SKF FYK 40 TF

Home SKF BEARING SKF Pillow block ball bearing unit SKF FYK 40 TF

SKF Pillow block ball bearing unit SKF FYK 40 TF

This square flanged bearing unit complies with ISO standards. The unit consists of an embedded bearing with an extended inner ring and a set screw locking device for applications where the direction of rotation is fixed or alternate. The bearings are mounted in composite housings and can be bolted to the machine sidewall or frame. Ball bearing units can tolerate moderate initial misalignment, but axial displacement is generally not allowed.

  • Chemical Resistant
  • Pre-filled grease lubricates for life
  • sturdy
SKF BEARING

Description

SKF FYK 40 TF

Meets standards
ISO
Specific applications
For material handling applications
Housing material
Composites
Bearing seals
Seal and slinger rings on both sides
Bearing seal type
Standard contact type
Sealed unit
Optional end caps
coating
No
尺寸 - FYK 40 TF尺寸 - FYK 40 TF

size

d
40 mm
 aperture
d1
≈51.8 mm
 Inner ring outer diameter
A
39 mm
 Housing width
A1
17 mm
 Clam width
A3
3.2 mm
 Centering groove depth
A5
25.5 mm
 End cap protrusion
B
49.2 mm
 Inner ring width
B1
49.2 mm
 Overall width of the bearing
B4
8 mm
 Distance from the side of the fastener to the center of the thread
Db
98 mm
 Top outer diameter
Dc
115.9 mm
 Diameter of the centering groove of the housing
J
101.5 mm
 The distance between the connecting bolts
L
130 mm
 Overall length
N
14.8 mm
 The diameter of the hole in the connecting bolt
s1
30.2 mm
 The distance from the side of the lockbuckle to the center of the raceway
T
54.2 mm
 Overall width

Data calculations

Basic dynamic load rating C
30.7 kN
Basic static load rating C0
19 kN
Fatigue load limits Pyou
0.8 kN
Limit speed
4 800 r/min
Ultimate speed at h6 shaft tolerances

Installation information

Set screws G2
M8x1
Hex wrench size for set screws
4 mm
Recommended set screw tightening torque
6.5 N·m
Recommended diameter of the connecting bolt, mm G
12 mm
Recommended diameter of the connecting bolt, inches G
0.5 in

As a professional bearing exporter and SKF distributor, WS Bearing stocks thousands kindsof ball bearing unit for sale，We can export to Singapore–Viet Nam–Malaysia–Indonesia-Germany-USA etc.we have always been committed to providing our customers with the highest quality products and the most satisfactory services. Through collaborations with top brands such as  SKF, TIMKEN, FAG, THK,and others, we have not only established a wide range of product lines but also accumulated rich industry experience and technical knowledge. If you have problems about selecting proper bearings for your special applications, please contact us right now

Inquiry Us





Related Products