Our goal is to exceed our customers' expectation in providing quality products
+86-177-4621-9784
admin@wsbearing.com
Single-row angular contact ball bearings can withstand both radial and axial loads, which can only act in one direction. Depending on the type, these bearings can operate at high or even very high speeds. It can withstand larger axial forces in one direction better than deep groove ball bearings.
SKF S7021 CD/HCP4A
| Universal mating bearings |
not
|
| d |
105 mm
|
aperture |
|---|---|---|
| D |
160 mm
|
Outside diameter |
| B |
26 mm
|
width |
| d1 |
121.9 mm
|
Inner ring flange diameter (large end) |
| d2 |
121.9 mm
|
Inner ring flange diameter (small end face) |
| D2 |
146.75 mm
|
Outer ring groove diameter (large end) |
| r1,2 |
min.2 mm
|
Chamfer size |
| r3,4 |
min.1 mm
|
Chamfer size |
| a |
30.8 mm
|
The distance from the end face to the pressure point |
| da |
min.114 mm
|
Shaft shoulder diameter |
|---|---|---|
| da |
max.121.3 mm
|
Shaft shoulder diameter |
| db |
min.114 mm
|
Shaft shoulder diameter |
| db |
max.121.3 mm
|
Shaft shoulder diameter |
| Da |
max.151 mm
|
Housing shoulder diameter |
| Db |
max.155 mm
|
Housing shoulder diameter |
| ra |
max.2 mm
|
Fillet radius |
| rb |
max.1 mm
|
Fillet radius |
| Basic dynamic load rating | C |
95.6 kN
|
|---|---|---|
| Basic static load rating | C0 |
96.5 kN
|
| Fatigue load limits | Pu |
2.6 kN
|
| The permissible speed at which the grease lubricates |
10 000 r/min
|
|
| Contact angle | α |
15 °
|
| Ball diameter | Dw |
17.462 mm
|
| Number of columns | i |
1
|
| Number of balls (per bearing) | z |
21
|
| Class A preload | GA |
360 N
|
|---|---|---|
| Class A preload axial stiffness (two bearings back-to-back or face-to-face configuration) |
129 N/µm
|
|
| Class B preload | GB |
720 N
|
| Preload Class B axial stiffness (two bearings back-to-back or face-to-face configuration) |
176 N/µm
|
|
| Class C preload | GC |
1 440 N
|
| Preload Class C Axial stiffness (two bearings back-to-back or face-to-face configuration) |
248 N/µm
|
|
| Class D preload | GD |
2 880 N
|
| Preload Class D Axial stiffness (two bearings back-to-back or face-to-face configuration) |
359 N/µm
|
| The correction factor depends on the bearing series and size | f |
1.15
|
|---|---|---|
| The correction factor depends on the angle of contact | f1 |
1
|
| preload grade A correction factor, | f2A |
1
|
| Preload class B correction factor | f2B |
1.02
|
| Preload C-level correction factor | f2C |
1.05
|
| Preload grade D correction factor | f2D |
1.09
|
| Correction factor for hybrid bearings | fHC |
1.02
|
| Equivalent load calculation factor | f0 |
15.7
|
|---|---|---|
| Equivalent load add-on factor |
Please see notes 1 and 2 below
|
As a professional bearing exporter and SKF distributor, WS Bearing stocks thousands kindsof Angular contact ball bearings,super-precision for sale，We can export to Singapore–Viet Nam–Malaysia–Indonesia-Germany-USA etc.we have always been committed to providing our customers with the highest quality products and the most satisfactory services. Through collaborations with top brands such as SKF, TIMKEN, FAG, THK, and others, we have not only established a wide range of product lines but also accumulated rich industry experience and technical knowledge. If you have problems about selecting proper bearings for your special applications, please contact us right now
